Palo Alto Networks Knowledgebase: How to Determine When Auto-Commit is Complete

How to Determine When Auto-Commit is Complete

9073
Created On 09/25/18 19:26 PM - Last Updated 02/07/19 23:58 PM
Resolution

Overview

After restarting the dataplane or resetting the Palo Alto Networks device, the auto-commit process must be allowed to complete in order for the dataplane to be up. Depending on the platform, this may take anywhere from 5-15 minutes. This document describes how to monitor the status of the auto-commit process.

Details

To monitor the status of the auto-commit process, use the CLI command show jobs processed.  When the ouput shows Type AutoCom with a status of FIN, the process is complete.

>  show jobs processed

Enqueued      ID      Type  Status  Result  Completed

-----------------------------------------------------

02:52:14       1   AutoCom     ACT    PEND        50%

>  show jobs processed

Enqueued      ID      Type  Status  Result  Completed

-----------------------------------------------------

02:52:14        1   AutoCom     FIN      OK   02:53:20

owner: gsamuels



Attachments
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClYgCAK&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Attachments
Choose Language