Error:
An unexpected error occurred. Please click Reload to try again.
Error:
An unexpected error occurred. Please click Reload to try again.
CLI Commands to View Hardware Status - Knowledge Base - Palo Alto Networks

CLI Commands to View Hardware Status

344848
Created On 09/25/18 19:21 PM - Last Modified 06/01/23 08:07 AM


Resolution


Overview

This document describes the CLI commands to provide information on the hardware status of a Palo Alto Networks device.

 

Note: For PAN-OS 5.0 and above. The commands do not apply to the Palo Alto Networks VM-Series platforms.

 

Details

To view hardware alarms  ("False" indicates "no alarm"):

> show system state | match alarm

chassis.alarm: { }
chassis.leds: { 'alarm': Off, 'fans': Green, 'ha': Off, 'status': Green, 'temp': Green, }
env.s0.fan.0: { 'alarm': False, 'avg': True, 'desc': Fan #1 Operational, 'min': 1, }
env.s0.fan.1: { 'alarm': False, 'avg': True, 'desc': Fan #2 Operational, 'min': 1, }
env.s0.power.0: { 'alarm': False, 'avg': 1.051, 'desc': 1.05V Power Rail, 'hyst': 0.007, 'max': 1.130, 'min': 0.980, 'samples': [ 1.045, 1.055, 1.055, ], }
env.s0.power.1: { 'alarm': False, 'avg': 1.094, 'desc': 1.1V Power Rail, 'hyst': 0.007, 'max': 1.180, 'min': 1.030, 'samples': [ 1.104, 1.084, 1.094, ], }
env.s0.power.2: { 'alarm': False, 'avg': 1.214, 'desc': 1.2V Power Rail, 'hyst': 0.014, 'max': 1.350, 'min': 1.080, 'samples': [ 1.211, 1.221, 1.211, ], }
env.s0.power.3: { 'alarm': False, 'avg': 1.807, 'desc': 1.8V Power Rail, 'hyst': 0.018, 'max': 1.980, 'min': 1.620, 'samples': [ 1.807, 1.807, 1.807, ], }
env.s0.power.4: { 'alarm': False, 'avg': 2.490, 'desc': 2.5V Power Rail, 'hyst': 0.025, 'max': 2.750, 'min': 2.250, 'samples': [ 2.490, 2.490, 2.490, ], }
env.s0.power.5: { 'alarm': False, 'avg': 3.340, 'desc': 3.3V Power Rail, 'hyst': 0.033, 'max': 3.630, 'min': 2.970, 'samples': [ 3.340, 3.340, 3.340, ], }
env.s0.power.6: { 'alarm': False, 'avg': 4.980, 'desc': 5.0V Power Rail, 'hyst': 0.050, 'max': 5.500, 'min': 4.500, 'samples': [ 4.980, 4.980, 4.980, ], }
env.s0.power.7: { 'alarm': False, 'avg': 2.490, 'desc': 3.0V RTC Battery, 'hyst': 0.175, 'max': 3.500, 'samples': [ 2.490, 2.490, 2.490, ], }
env.s0.thermal.0: { 'alarm': False, 'avg': 30.500, 'desc': Temperature at MP [U6], 'hyst': 2.250, 'max': 50.000, 'min': 5.000, 'samples': [ 30.500, 30.500, 30.500, ], }
env.s0.thermal.1: { 'alarm': False, 'avg': 34.500, 'desc': Temperature at DP [U7], 'hyst': 2.250, 'max': 50.000, 'min': 5.000, 'samples': [ 34.500, 34.500, 34.500, ], }
ha.runtime.device.alarm: False
hw.slot0.leds: { 'alarm': Off, 'fans': Green, 'ha': Off, 'status': Green, 'temp': Green, }

 

Other command samples:

    > show system state filter env.* | match alarm

    > show system state | match fan

    > show system state | match power

 

To display the most recent critical hardware alarms (Use the tab key to determine the options for the italicized words:  Backward = most recent, forward = oldest)

> show log system severity greater-than-or-equal critical direction equal backward
Time          Severity Subtype Object EventID ID Description
===============================================================================
01/20 06:51:58 critical ha            unknown 0  HA Group 1: commit on local device with running configuration not synchronized; synchronize manually
12/23 14:29:21 critical ha            unknown 0  HA Group 1: moved from state Passive to state Active
12/23 14:29:12 critical ha            unknown 0  HA Group 1: moved from state Non-Functional to state Passive
12/23 14:27:15 critical general        unknown 0  Chassis Master Alarm: HA-event
12/23 14:27:15 critical ha            unknown 0  HA Group 1: moved from state Active to state Non-Functional
12/23 14:27:15 critical ha            unknown 0  HA Group 1: dataplane is down
12/23 14:27:01 critical general        unknown 0  Heartbeat triggering a restart of 'data-plane' from the control-plane
11/09 17:39:44 critical general        unknown 0  Chassis Master Alarm: Fans
11/09 17:39:44 critical general        unknown 0  Fan #3 Speed: 5778.70 above high-limit 5750.00
09/29 08:52:26 critical ha            unknown 0  HA Group 1: commit on local device with running configuration not synchronized; synchronize manually
09/20 09:09:44 critical general        unknown 0  Fan #3 Speed: 5778.70 above high-limit 5750.00
09/20 09:09:44 critical general        unknown 0  Chassis Master Alarm: Fans
09/20 09:09:04 critical general        unknown 0  Chassis Master Alarm: Fans
09/20 09:09:04 critical general        unknown 0  Fan #3 Speed: 5776.98 above high-limit 5750.00
06/20 12:37:04 critical general        unknown 0  Chassis Master Alarm: Fans
06/20 12:37:04 critical general        unknown 0  Fan #1 Speed: 5845.59 above high-limit 5750.00

 

To display Thermal, Fans and Power status:

> show system environmentals

----Thermal----

Slot   Description                         Alarm      Degrees C

S0    Temperature at 3830 [U85]           False      43.33

S0    Temperature at LION [U86]           False      43.83

S0    Temperature at Phy [U87]            False      38.33

S0    Temperature at CPLD [U88]           False      44.50

 

----Fans----

Slot   Description                         Alarm      RPMs

S0    Fan #1 RPM                          False      14673

S0    Fan #2 RPM                          False      14465

S0    Fan #3 RPM                          False      14261

S0    Fan #4 RPM                          False      15004

 

----Power----

Slot   Description                         Alarm      Volts

S0    1.0V Power Rail                     False      0.98

S0    1.2V Power Rail                     False      1.20

S0    1.5V Power Rail                     False      1.51

S0    1.8V Power Rail                     False      1.80

S0    2.5V Power Rail                     False      2.48

S0    3.3V Power Rail                     False      3.31

S0    5.0V Power Rail                     False      5.02

S0    3.3V RTC Battery                    False      3.22

 

To check hardware alarm in logs:

> less mp-log ehmon.log

*

* Ehmon (v3.0)

*

Jan 07 01:54:26 Start time.

Jan 07 01:54:28 Loading: libfans.so... done

Jan 07 01:54:28 Loading: libpower.so... done

Jan 07 01:54:28 Loading: libthermal.so... done

Jan 07 01:55:28 Sensor Alarm [True ]: Fan #1 RPM = 8472

Jan 07 01:55:48 Sensor Alarm [False]: Fan #1 RPM = 8509

Jan 07 01:56:48 Sensor Alarm [True ]: Fan #1 RPM = 8437

Jan 07 01:57:28 Sensor Alarm [False]: Fan #1 RPM = 8544

 

Note: The alarm LED should clear when the condition that triggered it has cleared.

 

owner: panagent



Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClW2CAK&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Choose Language