Commit Failed When 0.0.0.0 is Configured as BGP Router ID
8383
Created On 03/31/19 03:04 AM - Last Modified 04/19/24 19:59 PM
Symptom
Commit fails without any error displayed after enabling BGP.
Environment
BGP router ID set to 0.0.0.0
Cause
1) This happens when the router ID is configured as 0.0.0.0 in BGP.
2) "Route daemon configuration load phase-2 failed" can be observed from the traffic logs.
Resolution
Router ID 0.0.0.0 is not a valid configuration in BGP. Commit will be successful after changing it to a non-zero value.