Commit Error Message - Error: Missing service value

Commit Error Message - Error: Missing service value

25934
Created On 11/16/18 21:38 PM - Last Modified 02/08/19 21:25 PM


Symptom


While doing a commit the following error message is seen:
Commit error message

Details: 
vsys1
Error: Missing service value
Error: Failed to parse security policy
(Module: device)
Commit failed

Cause


Commit job results in an error due to a missing service value for the security policies.
This issue can typically occur if the service port is removed from the CLI or an imported device configuration uploaded.

Resolution


Steps:
  1.  Verify the security policies - Policies > Security 
Example below shows a missing Service port definition in the security policy "Test Security Policy" (highlighted below).
Screenshot of Security Policy
 
  1.  Click on the security policy and add the missing Service port.
Missing Service port
 
  1.  Perform a Commit. (Note: Commit job should now complete successfully)

Additional Information


Please refer to the PAN-OS Administrator's Guide,  section "Security Policy".
Make sure all components of a security policy rule have been met.
Other users also viewed:
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/kcsArticleDetail?id=kA10g000000CmJk&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FkcsArticleDetail

Choose Language