How to Control Failover on Active/Passive HA for an Aggregate Interface

How to Control Failover on Active/Passive HA for an Aggregate Interface

36527
Created On 09/25/18 17:41 PM - Last Modified 06/08/23 01:04 AM


Resolution


Overview

Controlling failover for an aggregate interface can be achieved through a monitoring profile on the HA (High Availability) configuration. If the failover condition is set to "all" (default is "any"), then a failover triggers only when all monitored interfaces are down.

 

Steps

Go to Device > High Availability > Link Path Monitoring.

Set Failure Condition to All.

In this configuration, a failover occurs only when all monitoring interfaces are in the down state.

 

For example:

4.JPG.jpg

Aggregate interface, ae1:

1.JPG.jpg

Failure Condition set to All for the link group:

2.JPG.jpg

 

owner: sgantait



Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/kCSArticleDetail?id=kA10g000000ClIC&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FkCSArticleDetail

Choose Language