How to verify if authkey is configured on the firewall

How to verify if authkey is configured on the firewall

15121
Created On 08/29/22 21:33 PM - Last Modified 03/14/24 02:31 AM


Objective


How to verify if authkey is configured on the firewall?

Environment


  • Panorama
  • Firewall
  • PAN-OS 10.1 and above

Procedure


  1. Login to firewall CLI
  2. Run the command show system state filter cfg.ms*
  3. Below output shows no authkey is configured on the firewall as it has the sdb value as cfg.ms.csr only  
    udit@Lab80-123-PA-5250> show system state filter cfg.ms*

cfg.ms.csr: d36a84e4-8b8e-4593-99dc-f349c4b7a95a
  4. Configure the authkey on the firewall as request authkey set <auth-key> 
    udit@Lab80-123-PA-5250> request authkey set 2:y3nzS_HPRluh6x0_T76Z8NqXUHl2ukCAtnm0jp-1qB1cMIpVgAD_CvB0ILkCAQa4HzOn9Eji1vUHkYSkKXZxow

Authkey set.
  5. Verify the output of show system state filter cfg.ms* and we can see the additional sdb value as cfg.ms.ak 
    udit@Lab80-123-PA-5250> show system state filter cfg.ms*

cfg.ms.ak: -AQ==2Up+QgtRZJYPa3r95amhcTqAF6U=np7tP3AR1VbRBmWPdvQGW5/21ku03vuGGj/feBsd5fqhlDdbcP5gxzPvthdw6t3q+oqCuEGuoEGzhvtcyiN3PLroxBxSGY5J3qUtQlamir2RmQrLvqlDUb16ipgzSYz4
cfg.ms.csr: d36a84e4-8b8e-4593-99dc-f349c4b7a95a
 
 
 
Other users also viewed:
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000wlQHCAY&lang=en_US%E2%80%A9&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Choose Language