为什么是RAID重建看到的消息Panorama每周日 1:00AM .
12133
Created On 01/26/22 10:33 AM - Last Modified 04/23/24 03:35 AM
Question
当没有磁盘故障时，为什么Panorama每周日 1:00“重建”磁盘AM？
- RAID 磁盘对的重建在没有任何明显原因的情况下在集群的两个成员上开始
- 周日 1:00 开始AM.
- 在“raid.log”（少 mp 日志 raid.log ) 重建后拍摄。
Jan 16 01:00:01 DEBUG: raid_util: argv: ['RebuildStarted', '/dev/md2']
Jan 16 01:00:02 INFO: Rebuild of Disk Pair B Partition 1 started.
Jan 16 01:00:07 DEBUG: raid_util: argv: ['RebuildStarted', '/dev/md1']
Jan 16 01:00:08 INFO: Rebuild of Disk Pair A Partition 1 started.
Jan 16 03:11:43 DEBUG: raid_util: argv: ['Rebuild20', '/dev/md2']
Jan 16 03:11:44 DEBUG: Rebuild of Disk Pair B Partition 1 20 percent complete.
Jan 16 03:11:44 DEBUG: raid_util: argv: ['Rebuild20', '/dev/md1']
Jan 16 03:11:44 DEBUG: Rebuild of Disk Pair A Partition 1 20 percent complete.
Jan 16 05:22:50 DEBUG: raid_util: argv: ['Rebuild40', '/dev/md2']
Jan 16 05:22:50 DEBUG: Rebuild of Disk Pair B Partition 1 40 percent complete.
Jan 16 05:23:20 DEBUG: raid_util: argv: ['Rebuild40', '/dev/md1']
Jan 16 05:23:21 DEBUG: Rebuild of Disk Pair A Partition 1 40 percent complete.
Jan 16 07:36:56 DEBUG: raid_util: argv: ['Rebuild60', '/dev/md2']
Jan 16 07:36:57 DEBUG: Rebuild of Disk Pair B Partition 1 60 percent complete.
Jan 16 07:40:57 DEBUG: raid_util: argv: ['Rebuild60', '/dev/md1']
Jan 16 07:40:58 DEBUG: Rebuild of Disk Pair A Partition 1 60 percent complete.
Jan 16 10:11:04 DEBUG: raid_util: argv: ['Rebuild80', '/dev/md2']
Jan 16 10:11:04 DEBUG: Rebuild of Disk Pair B Partition 1 80 percent complete.
Jan 16 10:20:05 DEBUG: raid_util: argv: ['Rebuild80', '/dev/md1']
Jan 16 10:20:05 DEBUG: Rebuild of Disk Pair A Partition 1 80 percent complete.
Jan 16 13:28:54 DEBUG: raid_util: argv: ['RebuildFinished', '/dev/md2']
Jan 16 13:28:54 INFO: Rebuild of Disk Pair B Partition 1 finished.
Jan 16 13:43:55 DEBUG: raid_util: argv: ['RebuildFinished', '/dev/md1']
Jan 16 13:43:56 INFO: Rebuild of Disk Pair A Partition 1 finished.Environment
- Panorama M-200,M-500 , M-600
- PAN-OS 10.0, 10.1
Answer
- 默认情况下，这RAID管理实用程序将在每周日 1:00 安排“检查”工作AM通过 cron 作业。 此功能是从版本 10.0 添加的。
- “检查”不是“重建”，但 kernel/mdadm 无法区分这两种情况，因此出现相同的消息（“重建磁盘对... ") 在捕获中突袭日志.
Additional Information
检查期间RAID磁盘，显示输出“显示系统 raid 详细信息"如下图。
Panorama> show system raid detail
Disk Pair A Available
Status clean, checking <<<<
Disk id A1 Present
model : ST8000NM0055-1RM
size : 7630885 MB
status : active sync
Disk id A2 Present
model : ST8000NM0055-1RM
size : 7630885 MB
status : active sync
Disk Pair B Available
Status clean, checking <<<<
Disk id B1 Present
model : ST8000NM0055-1RM
size : 7630885 MB
status : active sync
Disk id B2 Present
model : ST8000NM0055-1RM
size : 7630885 MB
status : active sync预定期间RAID检查，状态显示为“清洁，检查”。
如果运行了实际重建，则状态显示为“重建”。
默认日期和时间无法更改。
此时间表设置为每周日 1:00AM .