如何查看SFP SFP+ 或QSFP模块收发器细节
138344
Created On 03/02/23 09:50 AM - Last Modified 04/24/25 11:32 AM
Objective
- 这篇文章涵盖了一些CLI查看已安装命令SFP收发器模块。
- 例子来自 PA-5450
Environment
- 帕洛阿尔托防火墙。
- PAN-OS 9.1或以上。
- SFP,SFP + 或QSFP收发器。
Procedure
CLI 不同端口的命令：
- 调试系统接口-xcvr-info aux-1
- 调试系统接口-xcvr-info aux-2
- 调试系统接口-xcvr-信息日志-1
- 调试系统接口-xcvr-信息日志-2
- 调试系统接口-xcvr-info ha1-a
- 调试系统接口-xcvr-info ha1-b
- 调试系统界面-xcvr-信息管理-a
- 调试系统界面-xcvr-信息管理-b
- show transceiver-detail <interface name>（用于以太网和 hsci 端口）
- 显示收发器-详细信息所有
> show transceiver-detail ethernet2/23
--------------------------------------------------------------------------------
Detailed Transceiver Information
--------------------------------------------------------------------------------
Interface: ethernet2/23
Vendor Name: OEM
Vendor Part Number: PAN-SFP-PLUS-SR Rev B4
Vendor Serial Number: GT03BA02188
Link Length for 62.5/125 um OM1 fiber: 20 m
Link Length for 50/125 um OM2 fiber: 80 m
Link Length for 50/125 um OM3 fiber: 300 m
Link Length for 50/125 um OM4 fiber: 0 m
Diagnostic Monitor Information:
--------------------------------------------------------------------------------
Alarms Warnings
High Low High Low
--------------------------------------------------------------------------------
Temperature 14.68 C 80.00 C -10.00 C 70.00 C 0.00 C
Voltage 3.28 V 3.63 V 2.97 V 3.47 V 3.14 V
Current 5.04 mA 20.00 mA 1.00 mA 15.00 mA 1.00 mA
TX Power 0.59 mW 1.26 mW 0.16 mW 0.79 mW 0.25 mW
RX Power 0.00 mW 1.78 mW 0.04 mW 1.12 mW 0.07 mW
--------------------------------------------------------------------------------
> debug system interface-xcvr-info log-1
Identifier : 0x03 (SFP)
Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector : 0x07 (LC)
Transceiver codes : 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Transceiver type : 10G Ethernet: 10G Base-SR
Encoding : 0x06 (64B/66B)
BR, Nominal : 10300MBd
Rate identifier : 0x00 (unspecified)
Length (SMF,km) : 0km
Length (SMF) : 0m
Length (50um) : 80m
Length (62.5um) : 20m
Length (Copper) : 0m
Length (OM3) : 300m
Laser wavelength : 850nm
Vendor name : OEM
Vendor OUI : 00:00:00
Vendor PN : PAN-SFP-PLUS-SR
Vendor rev : B4
Option values : 0x00 0x1a
Option : RX_LOS implemented
Option : TX_FAULT implemented
Option : TX_DISABLE implemented
BR margin, max : 0%
BR margin, min : 0%
Vendor SN : GT3H7060
Date code : 080702
Optical diagnostics support : Yes
Laser bias current : 5.800 mA
Laser output power : 0.6692 mW / -1.74 dBm
Receiver signal average optical power : 0.4176 mW / -3.79 dBm
Module temperature : 32.30 degrees C / 90.15 degrees F
Module voltage : 3.3017 V
Alarm/warning flags implemented : Yes
Laser bias current high alarm : Off
.....(Output Omitted)....
Additional Information
如何查看当前安装SFP模块
帕洛阿尔托网络接口和收发器的主要规范