Cómo encender la tarjeta DPC en el PA-5450
4847
Created On 10/03/24 04:06 AM - Last Modified 03/11/25 23:43 PM
Objective
Durante el reemplazo de la tarjeta DPC para RMA o durante la ventana de mantenimiento por algún motivo, el usuario debe apagar la tarjeta DPC en el PA-5450. Este artículo describe cómo encender la tarjeta DPC en el PA-5450.
Environment
- PANOS-11.1.3
- PA-5450
Procedure
Antes de iniciar este procedimiento, se comprobará el estado del chasis con "Mostrar estado del chasis".
admin@PA-5450> show chassis status Slot Component Card Status Config Status Disabled 1 PA-5400-NC-A PowerOff None 2 PA-5400-NC-A Up Success 3 PA-5400-DPC-A PowerOff None 4 PA-5400-DPC-A Up Success 5 empty 6 empty 7 PA-5400-MPC-A Up Success -------------------------------------------------------------------------------- Chassis autocommit ready : True Inserted slots : 1 2 3 4 7 Powered slots : 2 4 7 Config ready slots : 2 4 7 Config done slots : 2 4 7 Traffic enabled slots : 4 admin@PA-5450>
En este procedimiento, se enciende el DPC en la ranura s3 (el NC emparejado es NC en la ranura s1) como ejemplo.
1. Encienda la tarjeta DPC con "solicitud ranura de encendido del chasis" "
admin@PA-5450> request chassis power-on slot s3
Powering on Slot 3
Check the Logically Paired Slot 1 (PA-5400-NC-A). If Slot 1 is in PowerOff or AdminPowerOff state, power it on using Slot 1 specific CLI.
admin@PA-5450>
2. Encienda la tarjeta NC emparejada con la ranura de encendido del chasis "solicitud " "
As per the command output of 1, power on paired NC.
admin@PA-5450> request chassis power-on slot s1
Powering on Logical Paired Slot 3
Powering on Slot 1
admin@PA-5450>
After a few minutes, DPC and NC move Card Status to ?Up" and Config Status to ?Success".
admin@PA-5450> show chassis status Slot Component Card Status Config Status Disabled 1 PA-5400-NC-A Up Success 2 PA-5400-NC-A Up Success 3 PA-5400-DPC-A Up Success 4 PA-5400-DPC-A Up Success 5 empty 6 empty 7 PA-5400-MPC-A Up Success -------------------------------------------------------------------------------- Chassis autocommit ready : True Inserted slots : 1 2 3 4 7 Powered slots : 1 2 3 4 7 Config ready slots : 1 2 3 4 7 Config done slots : 1 2 3 4 7 Traffic enabled slots : 3 4 admin@PA-5450>
Or,
1. Encienda la tarjeta NC emparejada con la ranura de encendido del chasis de solicitud "
In this case, both of paired NC card and DPC are powered on same times.
admin@PA-5450> request chassis power-on slot s1 Powering on Logical Paired Slot 3 Powering on Slot 1 admin@PA-5450> show chassis status Slot Component Card Status Config Status Disabled 1 PA-5400-NC-A Starting None 2 PA-5400-NC-A Up Success 3 PA-5400-DPC-A Starting None 4 PA-5400-DPC-A Up Success 5 empty 6 empty 7 PA-5400-MPC-A Up Success -------------------------------------------------------------------------------- Chassis autocommit ready : True Inserted slots : 1 2 3 4 7 Powered slots : 1 2 3 4 7 Config ready slots : 2 4 7 Config done slots : 2 4 7 Traffic enabled slots : 4 admin@PA-5450> show chassis status Slot Component Card Status Config Status Disabled 1 PA-5400-NC-A Up Success 2 PA-5400-NC-A Up Success 3 PA-5400-DPC-A Up Success 4 PA-5400-DPC-A Up Success 5 empty 6 empty 7 PA-5400-MPC-A Up Success -------------------------------------------------------------------------------- Chassis autocommit ready : True Inserted slots : 1 2 3 4 7 Powered slots : 1 2 3 4 7 Config ready slots : 1 2 3 4 7 Config done slots : 1 2 3 4 7 Traffic enabled slots : 3 4 admin@PA-5450>
Additional Information
When the user powers off DPC card on PA-5450, the paired NC card is also powered off.
admin@PA-5450> request chassis power-off slot s3 now Executing this command will power off the given slot. Do you want to continue? (y or n) Powering off Logical Paired Slot 1 Powering off Slot 3 admin@PA-5450> show chassis status Slot Component Card Status Config Status Disabled 1 PA-5400-NC-A PowerOff None 2 PA-5400-NC-A Up Success 3 PA-5400-DPC-A PowerOff None 4 PA-5400-DPC-A Up Success 5 empty 6 empty 7 PA-5400-MPC-A Up Success -------------------------------------------------------------------------------- Chassis autocommit ready : True Inserted slots : 1 2 3 4 7 Powered slots : 2 4 7 Config ready slots : 2 4 7 Config done slots : 2 4 7 Traffic enabled slots : 4 admin@PA-5450>
Apéndice : En caso de que el usuario apague el DPC con la solicitud de apagado del administrador del chasis "?
When the user powers off DPC with "request chassis admin-power-off", the paired NC moves Card Status to "PowerOff".
In this state, the user has to power on DPC with "request chassis admin-power-on slot " first. Then, the user has to power on paired NC with "request chassis power-on slot ".
If the user powers on paired NC first, then it fails with following message.
admin@PA-5450> request chassis admin-power-off slot s3 now Executing this command will power off the given slot. Do you want to continue? (y or n) Powering off Logical Paired Slot 1 Powering off Slot 3 admin@PA-5450> show chassis status Slot Component Card Status Config Status Disabled 1 PA-5400-NC-A PowerOff None 2 PA-5400-NC-A Up Success 3 PA-5400-DPC-A AdminPowerOff None 4 PA-5400-DPC-A Up Success 5 empty 6 empty 7 PA-5400-MPC-A Up Success -------------------------------------------------------------------------------- Chassis autocommit ready : True Inserted slots : 1 2 3 4 7 Powered slots : 2 4 7 Config ready slots : 2 4 7 Config done slots : 2 4 7 Traffic enabled slots : 4 admin@PA-5450>
In this state, the user has to power on DPC with "request chassis admin-power-on slot " first. Then, the user has to power on paired NC with "request chassis power-on slot ".
admin@PA-5450> request chassis admin-power-on slot s3 Powering on Slot 3 Check the Logically Paired Slot 1 (PA-5400-NC-A). If Slot 1 is in PowerOff or AdminPowerOff state, power it on using Slot 1 specific CLI. admin@PA-5450> request chassis power-on slot s1 Powering on Logical Paired Slot 3 Powering on Slot 1 admin@PA-5450> show chassis status Slot Component Card Status Config Status Disabled 1 PA-5400-NC-A Up Success 2 PA-5400-NC-A Up Success 3 PA-5400-DPC-A Up Success 4 PA-5400-DPC-A Up Success 5 empty 6 empty 7 PA-5400-MPC-A Up Success -------------------------------------------------------------------------------- Chassis autocommit ready : True Inserted slots : 1 2 3 4 7 Powered slots : 1 2 3 4 7 Config ready slots : 1 2 3 4 7 Config done slots : 1 2 3 4 7 Traffic enabled slots : 3 4 admin@PA-5450>
If the user powers on paired NC first, then it fails with following message.
admin@PA-5450> request chassis power-on slot s1 Slot 1 is not powered on because the Logically Paired Slot 3 (PA-5400-DPC-A) is in AdminPowerOff state. admin@PA-5450>