How to check for probe session information on the Prisma SD-WAN ION devices
652
Created On 01/23/25 00:34 AM - Last Modified 03/27/25 00:16 AM
Objective
- ION device sends application probe to gather link quality information for path selection.
- The probe sessions cannot be seen from the flow browser.
- This article helps to check the probe session from the CLI.
Environment
- Prisma SD-WAN
- ION devices
- Probe sessions
- CLI
Procedure
To confirm the session information of the application probes, use the following command on the CLI.
dump app-probe flow server-ip=<destination ip address>Example:
dump app-probe flow server-ip=133.222.x.x
Protocol Source-IP:Port Dest-IP:Port App Name Expire-Type Expire Time Path ID
TCP 192.168.200.9:40241 133.222.x.x:80 enterprise-http 0 20 secs 1723338017325010696
TCP 192.168.200.9:53703 133.222.x.x:80 enterprise-http 0 26 secs 1723347707869009096