Some Firewalls are not showing under Panorama health section
3172
Created On 12/05/20 03:10 AM - Last Modified 07/28/25 17:07 PM
Symptom
- Some Firewalls are not showing under Panorama health section
- Both FW and Panorama should be running PAN-OS 8.1 or higher
Environment
- PAN-OS 8.1
- Firewalls connected to Panorama
Resolution
-Any Managed Firewall which does not meet the below criteria, will not show up under Panorama health section
-Following are the requirement for device monitoring through Panorama:
- 'Enable pushing device monitoring data to Panorama' option need to be check on the Firewall
- No additional configuration is required on Panorama.
On Firewall: Device>> Setup >> Management >> Panorama Settings
Additional Information
-Device monitoring can be enabled from cli of Firewall with below command:
>set deviceconfig setting management device-monitoring enabled <yes|no>