How to disable Path Monitoring Destination settings without removing the destination IP addresses
235
Created On 06/28/22 12:09 PM - Last Modified 10/29/25 17:49 PM
Objective
When you disable the Path Monitoring Destination settings once, all destination IP addresses will be deleted.
This is introduced by PAN-151909, and it is an expected behavior for now avoiding another issue.
Describe how to disable Path Monitoring Destination settings without removing the destination IP addresses.
Environment
- PAN-OS platforms
- 9.1.10 and later
- 10.0.1 and later
Procedure
- Move to Network > Virtual Routers > Click the specific Virtual Router > Static Routes
- Click an existing route which you would like to disable monitoring
- Stay Enable the Path Monitoring checkbox
- Click the name of the monitoring entry and uncheck the Enable checkbox then click OK to close the Path Monitoring Destination window
- Take the same action on all destination entries which you would like to disable
- After setting changes, perform a commit to apply these changes
Additional Information
Note: This behavior cannot be seen if the firewall is running on PAN-OS 10.1 or 10.2, but it will be changed future.