PA-5450 interface details about breakout ports

• PA-5450
• Any PAN-OS version

The PA-5400 NC-A includes two form-factor pluggable (QSFP+/QSFP28) 40GE/100GE Ethernet ports, and each interface supports breakout mode to create four 10GE or four 25GE ports each.

Here are a few things to keep in mind when configuring these ports:

• Ethernet 1/25 is mapped to ports 5-8.
• Ethernet 1/26 is mapped to ports 9-12.
• When a physical (parent) port has been decomposed into 4 child ports the parent port is not available (the parent and 4xchild ports are mutually exclusive).
  • This means that if Ethernet 1/25 is configured in any way, Ethernet 1/5-8 will be greyed out and if any of Ethernet 1/5-8 are configured then Ethernet 1/25 will be greyed out.
• The port speed configuration options for child ports (i.e. 5-8) are Auto, 25G or 10G and all four ports in a quad group must be configured at the same speed.

To clear all configuration from a specific port use the CLI command below (where x is the port number):

> configure
# delete network interface ethernet ethernet1/x