How to sync QoS interface settings in Active/Active HA

How to sync QoS interface settings in Active/Active HA

2006
Created On 07/20/21 02:16 AM - Last Modified 05/13/24 21:45 PM


Objective


  • In Active/Active HA environment, QoS interface settings are not be synced by default.
  • The article provides steps to synchronize QoS interface settings between HA devices.

Environment


  • Palo Alto Firewalls
  • Supported PAN-OS
  • Active/Active High Availability (HA) environment
  • QoS setting

Procedure


  1. Suspend on the Active-secondary device to avoid non-functional state.
    • GUI: Device > High-Availability > Operational Commands > Click "Suspend local device"
  2. Enable QoS sync setting on both HA peer.
    • GUI: Device > High-Availability > Active/Active Config > Packet Forwarding > Click in "QoS sync"
  3. Commit the configuration.
  4. Manually perform a "Sync to peer" from Active-primary.
    • GUI: Dashboard > Click "Sync to peer" under the High Availability widget.
  5. Make functional on the Active-secondary device.
    • GUI: Device > High-Availability > Operational Commands > Click "Make local device functional"

Additional Information
Other users also viewed:
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u0000001Vv4CAE&lang=en_US&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail