How to enable the packet capture on Web UI
323
Created On 06/21/21 22:58 PM - Last Modified 10/23/26 20:03 PM
Objective
Palo Alto firewall has a packet capture feature built-in.
However, If the firewall is unable to display the packet capture feature from the WebUI, You can enable this feature through the CLI commands.
Environment
- Any PAN OS
- All the Palo alto Firewalls.
Procedure
First of all, Please check the current packet-diag setting and clean up the value.
> Debug dataplane packet-diag show setting > Debug dataplane packet-diag clear all
If you still can't see the packet capture from the WebUI,
please restart the Management Server and Web-related server process.
# Restart the management server daemon
> debug software restart process management-server
# Restart the web backend process
> debug software restart process web-backend
# Restart the web server process
> debug software restart process web-server
Additional Information
Getting Started : Packet Capture
Verification:
-
Log back into the firewall Web Interface.
-
Navigate to Monitor > Packet Capture.
-
Confirm that the packet capture configuration stages (Filtering, Receive, Transmit, Drop) and control buttons are visible and accessible.