How to verify LFC and interface status
20092
Created On 05/28/21 14:17 PM - Last Modified 10/22/24 23:05 PM
Objective
- To verify location of LFC (Log Forwarding Card) on PA-7000 series
- To verify LFC status
- To verify which LFC interface is configured and its link status
Environment
Supported PAN-OS
Firewall PA-7050, PA-7080
LFC (Log Forwarding Card)
Procedure
Note: There is one LFC model used for both the PA-7050 and PA-7080 firewalls. On the PA-7050 firewall, you must install the LFC in slot 8 and on the PA-7080 firewall you must install the LFC in slot 7.
* To verify location of LFC on PA-7000 series
PA-7050> show chassis inventory
Slot Component Serial Number Ports Revision Power (w)
Chassis 0101080XXXXX 1.0
1 PA-7000-100G-NPC-A 0156010XXXXX 28 1.0 430
2 empty
3 empty
4 PA-7050-SMC-B 0185010XXXXX 0 1.0 500
5 empty
6 empty
7 empty
8 PA-7000-LFC-A 0183010XXXXX 10 1.0 240
* To verify LFC status
PA-7050> show chassis status slot s8
Slot Component Card Status Config Status Disabled
8 PA-7000-LFC-A Up Success
Card Status: 'Up'
Detail: Card is powered on and system software is running
Config Status: 'Success'
Detail: Phase2
* To verify which LFC interface is configured and its link status
PA-7050> debug log-card-interface info slot s8
-------------------------------------------------------------------------------
Name: log-card-interface
Left LFC QSFP module as 4x10G:
Port 1 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Port 2 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Port 3 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Port 4 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Left LFC QSFP module as 1x40G:
Port 9 Link status:
Runtime mode/setting/link: Autoneg/40Gb/s-full/Up >>> Port 9 (40Gb) is configured and Up
Configured mode/setting: Autoneg/40Gb/s-full
Right LFC QSFP module as 4x10G:
Port 5 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Port 6 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Port 7 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Port 8 Link status:
Runtime mode/setting/link: PowerDown/10Gb/s-full/Down
Configured mode/setting: PowerDown/10Gb/s-full
Right LFC QSFP module as 1x40G:
Port 10 Link status:
Runtime mode/setting/link: Autoneg/40Gb/s-full/Down
Configured mode/setting: Autoneg/40Gb/s-full
MAC address:
Port MAC address d4:1d:71:aa:bb:cc
Ip address: 10.10.10.11
Netmask: 255.255.255.0
Default gateway: 10.10.10.1
Ipv6 address:
Ipv6 link local address: unknown
Ipv6 default gateway:
-------------------------------------------------------------------------------