监控 SNMP PA-VM Azure 中使用的以太网界面统计
22576
Created On 08/02/19 09:57 AM - Last Modified 03/26/21 17:45 PM
Symptom
- SNMPWalk 仅 PA-VM 显示管理接口的统计数据。
- 其他界面的统计数据与下面的显示屏类似:
$ snmpwalk -c public -v2c A.B.C.D 1.3.6.1.2.1.31.1.1.1.6
(Note: A.B.C.D is firewall management IP address and 1.3.6.1.2.1.31.1.1.1.6 is OID for interface information.)
IF-MIB::ifHCInOctets.1 = Counter64: 0
IF-MIB::ifHCInOctets.2 = Counter64: 0
IF-MIB::ifHCInOctets.3 = Counter64: 18209008 <=========Management interface
IF-MIB::ifHCInOctets.4 = Counter64: 0
IF-MIB::ifHCInOctets.5 = Counter64: 0
IF-MIB::ifHCInOctets.6 = Counter64: 0
IF-MIB::ifHCInOctets.7 = Counter64: 0
IF-MIB::ifHCInOctets.8 = Counter64: 0
IF-MIB::ifHCInOctets.9 = Counter64: 0
IF-MIB::ifHCInOctets.10 = Counter64: 0
IF-MIB::ifHCInOctets.200000000 = Counter64: 0
IF-MIB::ifHCInOctets.300000000 = Counter64: 0
IF-MIB::ifHCInOctets.400000000 = Counter64: 0
Environment
- PAN-OS 7.1、8.0 和 9.0。
- 帕洛阿尔托 VM Firewall 在微软蔚蓝。
Cause
界面统计数据显示没有值的原因是 V 9.0 及以下中超使用的 Linux 以太网驱动程序 PAN-OS 不支持设备统计,就像其他平台一样。
Resolution
将 PAN-OS 版本升级到 9.1 或以上。
PAN-OS 版本 9.1 使用较新的 Linux 以太网驱动程序进行 V Hyper-( LIS 驱动程序版本为 4.3.2),解决了此问题。
Additional Information
微软虚拟机的其他非支持功能可以 在这里找到。