提交失败与错误"mprelay：阶段1：配置推送错误（模块：设备）提交失败"

• 提交失败与错误"mprelay：阶段1：配置推送错误（模块：设备）提交失败"
• 当配置聚合界面时，可能会发生这种情况。
• Mprelay 日志显示配置的界面条目<value>超过 fpga 容量 <value </value>>如下所示。

Mprelay log 
2019-02-27 11:06:09.009 +0000 Error: pan_hawk_ifconfig_p1(src_5000/cp/pan_platform_hawk.c:2662): configured interface entries 16447 exceeded fpga capacity 16384  
2019-02-27 11:06:09.010 +0000 Error: pan_hawk_netconfig_p1(src_5000/cp/pan_platform_hawk.c:2801): interface configuration phase 1 failed
2019-02-27 11:06:09.010 +0000 Hawk network configuration phase 1 returns -1
2019-02-27 11:06:09.010 +0000 Error: pan_mprelay_handle_phase1_cfg(src/pan_mprelay_cfg.c:1485): Fail to complete platform phase 1 config.
2019-02-27 11:06:09.010 +0000 Error: pan_mprelay_cfg_callback(src/pan_mprelay_cfg.c:252): pan_mprelay_handle_cfg_phase1() failed
2019-02-27 12:48:03.826 +0000 MPrelay: Cfgpush callback.
2019-02-27 12:48:03.826 +0000 phase1 abort
2019-02-27 12:48:03.903 +0000 MPrelay: Cfgpush callback.

• 任何 PA Hardware firewall .
• 已配置聚合界面。
• 在聚合接口下配置的子接口。

• FPGA 当 AE 子内部与虚拟路由器关联时计算限制。 当计算超过 FPGA 该限制 firewall 时，将显示上述错误消息

系统日志指示提交失败。

System.log 
2019/03/01 09:44:53 high general general 0 Commit job failed for user admin
2019/03/01 09:44:53 info sslmgr sslmgr- 0 SSLMGR daemon configuration load phase-1 aborted.
2019/03/01 09:44:53 info satd satd-co 0 SATD daemon configuration load phase-1 aborted.
2019/03/01 09:44:53 info ras rasmgr- 0 RASMGR daemon configuration load phase-1 aborted.
2019/03/01 09:44:53 info routing routed- 0 Route daemon configuration load phase-1 aborted.
2019/03/01 09:44:53 info vpn ike-con 0 IKE daemon configuration load phase-1 aborted.

devsrvr.log 
Warning: pan_cfg_sysd_parse_response_msg(pan_cfg_sysd.c:859): got error response from cfgpush.s1.comm.cfg: Error: mprelay : phase1 : config push error
mp devsrv.log 2019-03-01 09:44:53 
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.091 +0000 debug: pan_config_push_phase1(pan_config_handler_sysd.c:2078): got error for phase1 push
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.091 +0000 Error: pan_config_handler_sysd(pan_config_handler_sysd.c:2283): pan_config_push_phase1() failed
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.091 +0000 Error: pan_ctrl_parse_config(pan_controller_proc.c:392): pan_config_handler_sysd() failed
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.096 +0000 debug: pan_url_category_reset_defaults(pan_url_category.c:318): Revert to original BrightCloud categories
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.096 +0000 debug: pan_url_category_reset_defaults(pan_url_category.c:323): Revert to original PAN categories
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.142 +0000 Error: pan_ctrl_config_phase1(pan_controller_proc.c:746): pan_ctrl_parse_config() failed
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.142 +0000 Config commit phase1 failed
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.148 +0000 debug: cfgagent_flags_callback(pan_cfgagent.c:226): device: cfg agent received flags from server
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.148 +0000 debug: cfgagent_flags_callback(pan_cfgagent.c:230): new flags=0x0
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.148 +0000 Config commit phase1 abort
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.148 +0000 kill SIGUSR1 to pid 0
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.148 +0000 debug: pan_config_abort_sysd(pan_config_handler_sysd.c:2346): no config phase 1 to be aborted
mp devsrv.log 2019-03-01 09:44:53 2019-03-01 09:44:53.149 +0000 Error: cfgagent_modify_callback(pan_cfgagent.c:84): Modify string (sw.mgmt.runtime.clients.device.err) error: USER (1)