How to reconfigure an SFP+ port to become an SFP port on a PA-850

How to reconfigure an SFP+ port to become an SFP port on a PA-850

25390
Created On 06/27/19 21:50 PM - Last Modified 09/29/23 19:49 PM


Objective


To provide users with the flexibility to configure the PA-850 firewall's SFP ports to operate at either 1Gbps or 10Gbps speeds, based on their specific needs.

Environment


  • PA-850

Procedure


  1. Run the following command to reconfigure the SFP+ ports to SFP: 
admin@PA-850> set system setting ports-9-12-speed sfp
  1. Restart the firewall to make the changes effective:
admin@PA-850> request restart system
  1. To verify the current settings for these four ports, run the following command:
admin@PA-850> show system setting ports-9-12-speed

 
Other users also viewed:
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PMEwCAO&lang=en_US%E2%80%A9&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Choose Language