How to reconfigure an SFP+ port to become an SFP port on a PA-850
25404
Created On 06/27/19 21:50 PM - Last Modified 09/29/23 19:49 PM
Objective
To provide users with the flexibility to configure the PA-850 firewall's SFP ports to operate at either 1Gbps or 10Gbps speeds, based on their specific needs.
Environment
- PA-850
Procedure
- Run the following command to reconfigure the SFP+ ports to SFP:
admin@PA-850> set system setting ports-9-12-speed sfp
- Restart the firewall to make the changes effective:
admin@PA-850> request restart system
- To verify the current settings for these four ports, run the following command:
admin@PA-850> show system setting ports-9-12-speed