How to Add Exempt IP Addresses from the Threat Monitor Logs

How to Add Exempt IP Addresses from the Threat Monitor Logs

139631
Created On 09/26/18 21:06 PM - Last Modified 10/16/26 12:56 PM


Symptom


Overview

This document describes the steps to add an Exempt IP address for a specific threat. This procedure is valid for all Vulnerability Protection, Anti-Spyware, and DNS signatures.



Environment


  • Palo Alto Firewall.
  • Any PAN-OS.
  • Exceptions to threats seen in Threat log 


Resolution


Steps

  1. Navigate to GUI: Monitor > Logs > Threat
 
  1.  Hover over the target threat name; a pulldown ▾ icon will appear to the right of the Threat name. Click the ▾ pulldown Icon and select "Exception". This is the threat to which the exempt IP addresses are to be added.
  1. Make sure there is a vulnerability profile associated with a security policy. In this example, the 'test123' vulnerability profile has been applied. At this point, check the box to highlight the profile and add the IP address (as shown in the image below). Click OK.
    Note: The IP address can be the Victim or Attacker (source address or destination address ) as shown in the following logs.
 
  1. Confirm the updates by going to the vulnerability profile and clicking on the exceptions tab. From there, click on the 'IP Address Exemptions" applet, as shown below, to verify the changes.
 
  1. After you verify the changes and confirm the IP addresses of hosts are entered correctly, click OK.
  1. Now access the Vulnerability Protection profile and verify if the created exception's default Action for the signature matches up with what is intended to happen with the traffic matching the IP address exemption. If the default action is not what is intended, adjust it to the correct Action.
 
  1. Commit the configuration. From now on, in this example, traffic from or to IP address(es) added to the list of Exempt IP addresses will trigger a default(alert) action for this vulnerability signature (for traffic matching a Security Policy tied to this Vulnerability Profile). All other traffic not matching the granular Exception (granular Exception, meaning an Exception that has IP Address Exemptions configured) will execute the actions defined in the Vulnerability Profile's 'Rules' tab. 
  2. An Exception added to DNS Signature by threat monitor logs is different from the other two. You can still add an IP address in the exception list.
    1. Starting with PAN-OS 9.0, Palo Alto Networks introduced another type of signature -DNS security. An exception can be added to the DNS signature by selecting it through threat logs. 
   2. You can add the IP address that needs to be exempted from this DNS signature. This exception is added for any traffic that will match this profile. 
3. Confirm the IP address is exempt by navigating to your Anti-spyware profile and searching for the TID under Signature Exceptions
 
 


Additional Information


Related KB articles: 

What is the behavior when IP address/s are added under "IP-address-exemptions" for spyware/threat exception?

Note: Often times IP Address Exemptions are incorrectly interpreted as Exceptions to the Exceptions, however, the correct interpretation of IP Address Exemptions is that they make Exceptions more granular.


Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm60CAC&lang=en_US&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Choose Language