Palo Alto Networks Knowledgebase: How to Configure RADIUS on the Windows 2008 Server

How to Configure RADIUS on the Windows 2008 Server

3903
Created On 02/07/19 23:39 PM - Last Updated 02/07/19 23:40 PM
Resolution

Overview

The following procedure explains how to configure Radius on Windows 2008 Server.

 

Details

To configure RADIUS (or Network Policy Server, in Windows 2008), add a RADIUS client.

Inside the Network Policy Server (Start > Administrative Tools > Network Policy Server),

right-click on RADIUS Clients and select New RADIUS Client.

Complete the form using the IP address on the Management Interface of the Palo Alto Networks device and the password configured for RADIUS in the Palo Alto Network device.

Then click OK.

Use the default Connection Request Policy. There is no need to create a new one.

 

Configure a Network Policy, right-click Network Policies within the Network Policy Server, then click New.

Radius2.jpg

Radius3.jpg

Radius4.jpg

Radius5.jpg

 

Other User Groups besides the Domain Users group can be used:

Radius6.jpg

Radius7.jpg

Radius8.jpg

 

Select Unencrypted Authentication (PAP, SPAP):

Radius9.jpg

Radius10.jpg

 

Click Next, the Defaults are fine.

Radius11.jpg

 

Click Next, the Defaults are fine.

Radius12.jpg

Radius13.jpg

 

owner: panagent



Attachments
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm2JCAS&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Attachments
Choose Language