How to Import/Export a Default Route Using BGP

Overview

This document describes how to import and export the default route using BGP. After a BGP connection is established all routes will be exchanged between peers. This configuration will allow only default routes to exchange between peers. All other routes will be filtered by the Palo Alto Networks device.

Steps

Export the Rule

1. From the WebGUI, go to Network > Virtual router and click "default."
   
2. Select "BGP" > click on the "Export" tab and  click "Add" to create the export rule.
   
3. Go to "Match" and add "Address prefix." Enable the "exact" option, as shown below.
   

Import the Rule

1. From the WebGUI, go to Network > Virtual router and click "default."
2. Select "BGP" > click on the "Import" tab and click "Add" to create the import rule.
   
3. Go to "Match" and add "Address prefix." Enable the "exact" option, as shown below.
   

owner: sbabu