Palo Alto Networks Knowledgebase: How to Replace a Managed Device with a New Device on Panorama from the CLI

How to Replace a Managed Device with a New Device on Panorama from the CLI

3633
Created On 02/08/19 00:06 AM - Last Updated 02/08/19 00:06 AM
Logging Service Panorama
Resolution

Overview

Older managed device can be replaced with new device by using a CLI command.

Important: Do not add the replacement unit under managed devices.

 

Steps

Perform the following steps from the Panorama CLI.

  1. Enter the following command:
    > replace device old <old SN#> new <new SN#>
  2. Go into configuration mode and commit the changes.
    > configure
    # commit

 

On the managed firewall, configure the Panorama IP address (Device > Setup > Management > Panorama Settings) and commit the changes.

Note: The device will be in a connected state on Panorama once the new firewall is configured with the Panorama IP address .

 

owner: tindla



Attachments
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CljGCAS&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Attachments
Choose Language