Palo Alto Networks Knowledgebase: How to check the media type on the interface of a Palo Alto Networks device

How to check the media type on the interface of a Palo Alto Networks device

11647
Created On 02/08/19 00:03 AM - Last Updated 02/08/19 00:04 AM
Symptom

How to check the media type on the interface of a Palo Alto Networks device?



Resolution

Please run the below command in the CLI of the Palo Alto Networks device.

 

show system state filter sys.s1.p*.phy

 

111.JPG

 

[Output sample]

sys.s1.p*.phy

p1 stands for ethernet1/1

p2 stands for ethernet1/2

p3 stands for ethernet1/3

p4 stands for ethernet1/4

 

'media': CAT5 stands for category ethernet5 cable

'media': SFP-Empty stands for 1G fiber port but SFP not inserted

'media': SFP-Fiber stands for 1G fiber port and SFP inserted

 

'media': SFP-Plus-Empty stands for 10G fiber port but SFP not inserted

'media': SFP-Plus-Fiber stands for 10G fiber port and SFP inserted

 



Attachments
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClhbCAC&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Attachments
Choose Language