Palo Alto Networks Knowledgebase: How to Increase ARP and MAC Capacity on PA-3020 and PA-3050

How to Increase ARP and MAC Capacity on PA-3020 and PA-3050

3533
Created On 02/08/19 00:03 AM - Last Updated 02/08/19 00:03 AM
Device Management Initial Configuration Installation QoS Zone and DoS Protection
Resolution

PAN-OS 6.1

 

Details

PAN-OS 6.1 introduced the following command to increase the capacity of the Address Resolution Protocol (ARP) table and the MAC address table on PA-3020 and PA-3050 devices:

PA> debug system arp-mac-capacity increased

 

On the PA-3020 the ARP table capacity can be increased from 1500 to 3000.

On the PA-3050 the number of table entries can be increased from 2500 to 5000.

 

Note: This change requires a reboot. Once the command is run, the system will ask for confirmation and if there is HA, it must be run on both peers.

 

See Also

What is the Maximum Number of MAC Address and ARP Addresses that the Firewall can Handle?

 

owner: gbogojevic



Attachments
Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clh2CAC&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Attachments
Choose Language