Error:
An unexpected error occurred. Please click Reload to try again.
Error:
An unexpected error occurred. Please click Reload to try again.
How to Configure a Palo Alto Networks Firewall as a DHCP Server - Knowledge Base - Palo Alto Networks

How to Configure a Palo Alto Networks Firewall as a DHCP Server

124600
Created On 09/25/18 17:58 PM - Last Modified 06/06/23 07:38 AM


Resolution


To configure a Palo Alto Networks firewall as a DHCP server:

  • Begin by opening a new WebUI management session
  • Navigate to Network > DHCP > DHCP Server 
  • Click the Add button at the bottom of the window.
  • The DHCP Server configuration window will open and the DHCP server options will be displayed.
    Note: The sections shaded in yellow are the minimum fields necessary for a working DHCP deployment, however additional options may be configured as needed.

54770_dhcp-server-config-window.JPG

  • Select the interface which will be sourcing DHCP leases
  • Specify the default gateway and primary DNS
  • Specify the desired lease range in the 'IP Pools' section.
  • Address ranges may be entered using CIDR notation, or by entering the start and end IP addresses in the range separated by a "-" dash.
  • Click 'OK'
  • Commit the changes to enable DHCP services.

 

owner: ggarrison



Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClM6CAK&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Choose Language