How to View Incoming Logs on Panorama

• Panorama configured as Log Collector
• Managed Firewalls sending logs to collector
• Supported PAN-OS

1. On Panorama, Use the CLI command ">debug log-collector log-collection-stats show incoming-logs" 
2. The panorama must be configured as log collector. The command is not applicable when Panorama is configured in management-only mode.
3. The command will display the  incoming logs from the managed firewalls

> debug log-collector log-collection-stats show incoming-logs

Incoming log rate = 209.69

Detail counts by logtype:
traffic:115854811
config:10
system:10273
threat:108598180
appstat:0
trsum:0
thsum:0
event:0
alarm:0
hipmatch:0
userid:0

Inbound logger stats:
traffic: logcount:115854811 blkcount:16402
config: logcount:10 blkcount:8
system: logcount:10273 blkcount:179
threat: logcount:108598180 blkcount:16164
appstat: logcount:0 blkcount:0
trsum: logcount:4220956 blkcount:589
thsum: logcount:2413 blkcount:17
event: logcount:0 blkcount:0
alarm: logcount:0 blkcount:0
hipmatch: logcount:0 blkcount:0
userid: logcount:0 blkcount:0
Num Entries in trsum:134455

Num Entries in thsum:0
Num WIP blocks:1
Num blocks in write queue:0
Num blocks in Summary Calc queue:0
Num blocks in Summary Flush queue:0