How to Set Default Route for IPv6 Traffic
38076
Created On 09/25/18 17:51 PM - Last Modified 01/10/23 04:30 AM
Symptom
This document describes how to set the default route for IPv6 traffic.
Environment
- Palo Alto Firewalls
- PAN-OS 7.1 or higher
- IPv6 enabled
Resolution
- Go to Network > Virtual Router
- Add a Virtual Router and go to Static Routes > IPv6.
- Add a Static Route:
- Set destination (example, IPV4 0.0.0.0/0) as ::/0
- Select the Interface
- Set the Next Hop IP address
- Commit the changes.
Note: Make sure IPV6 is enabled on firewall. See How to Enable and Disable IPv6 Firewalling .