How to Set Default Route for IPv6 Traffic
23753
Created On 09/25/18 17:51 PM - Last Modified 02/08/19 00:06 AM
Resolution
Overview
This document describes how to set the default route for IPv6 traffic.
Steps
- Go to Network > Virtual Router
- Add a Virtual Router and go to Static Routes > IPv6.
- Add a Static Route:
- Set destination (example, IPV4 0.0.0.0/0) as ::/0
- Select the Interface
- Set the Next Hop IP address

- Commit the changes.
Note: Make sure IPV6 is enabled on firewall. See How to Enable and Disable IPv6 Firewalling.
owner: ukhapre
Attachments