Created On 09/25/18 17:41 PM - Last Modified 03/26/21 16:26 PM
Environment
任何 PAN-OS .
帕洛阿尔托 Firewall 或 Panorama .
Resolution
运行以下命令来查看配置：
"设置"格式：>设置 cli 配置输出格式集
"xml"格式：>设置cli 配置-输出格式 xml
进入配置模式：> 配置
输入显示以查看完整配置。 您还可以查看某些组件，如"显示网络接口"。
注意：show的输出不一定是执行命令的顺序。 A 显示在顶部的命令可能会引用列表中稍后定义的某些问题。
下面的示例演示如何以"集"格式查看配置。
> set cli config-output-format set
> configure
Entering configuration mode
[edit]
# show
set mgt-config devices localhost.localdomain ip 127.0.0.1
set mgt-config user admin phash fnRL/G5lXVMug
set mgt-config user admin permissions role-based superuser yes
set zone L3-Trust network layer3 ethernet1/3
set zone L3-Trust network layer3 ethernet1/4
set zone L3-Trust network layer3 ethernet1/5
set zone L3-Trust enable-user-identification no
set rulebase security rules rule1 from any
set rulebase security rules rule1 to any
set rulebase security rules rule1 source any
set rulebase security rules rule1 destination any
set rulebase security rules rule1 service any
set rulebase security rules rule1 application any
set rulebase security rules rule1 action allow
...