Error:
An unexpected error occurred. Please click Reload to try again.
Error:
An unexpected error occurred. Please click Reload to try again.
How to Configure LACP - Knowledge Base - Palo Alto Networks

How to Configure LACP

257074
Created On 09/25/18 17:30 PM - Last Modified 10/11/24 18:33 PM


Objective


This document specify how to aggregate multiple interfaces on Palo Alto Networks Firewall to acts a single logical interface.

Environment


  • Palo Alto Networks Firewall.
  • PAN-OS 8.1 and above
  • LACP


Procedure


1. Create an Aggregate Interface

Aggregate Interface.png

2. Enable LACP. Make sure at least one side is in active mode.

Enable LACP.png

Step 3. Assign physical interface to Aggregate interface

Assign_Interface.png

4. Verification command: > show lacp aggregate-ethernet all
Verify LACP with show lace aggregate-ethernet command



Additional Information


Configure an Aggregate Interface Group

Actions
  • Print
  • Copy Link

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClG8CAK&lang=en_US&refURL=http%3A%2F%2Fknowledgebase.paloaltonetworks.com%2FKCSArticleDetail

Choose Language